Call us at
(+91) 8800090671
Email us at
Call us at
Email us at
The mirror effect ink is screen printing ink that can offer mirror appearance by printing on the back side of transparent film and sheeting.
| Ink type | Evaporation-drying ink (one pack type)/available as two-part-reaction ink |
| Usage | Used for obtaining metallic mirror appearance by printing on the back side of transparent and flat surface of plastic sheets like treated PET, Polycarbonate, Hard PVC & Acrylic. Mirror effect ink blended with special aluminum powder and resin that creates metallic brilliant effects instead of hot stamping or metallic plating by vacuum evaporation. |
| Screen | Polyester/nylon 250～300 mesh/inch fabric is recommended. Printable area approximately 30～70㎡/kg through polyester 270 mesh/inch fabric. |
| Drying time | Drying at low temperature and humidity makes higher mirror effects. Initial-drying approximate 10～15 minutes at 20～25℃ Forced-drying approximate 40～60 minutes at 60～80℃ |
| Others | Special caution in printing set up is required for printing with Mirror effect ink and Mirror effect ink No.3 series because the viscosity of those products is much lower than a conventional screen printing ink. ・Check the mirror effect on actual substrates(particularly “molded parts”) prior to production run, as a poor mirror appearance may be brought depending on the properties of substrate such as solvent resistance, transparency and surface flatness. ・The adhesion may be improved by adding approximately 2% of D-Hardener when you must print on poor adhesion substrate. |
| Characteristics | High mirror effect, High viscosity and Excellent printability |
| Soaked in boiling water | No Effect |
As a partner who thinks about the future and colors the moment, we will realize our value contribution to society.
09 to 17.30 (Except Sunday & holiday)